ACR Electronics SmartReader Plus Manuel d'utilisateur télécharger pdf (Page 53)

User Interface

2005 ACR Systems Inc.

5.5.1 Connections Node

The Connections node is used for finding out information on the connections available on your

computer. To contact a logger, see

connection

Actions

When the Connections node is selected, you can Scan for Connections. Scanning will check

to see which communications ports are available. If you have added a port after running the

program, such as by plugging in an IC102 Cable into the USB port, select Scan for

Connections so that

TrendReader Standard 2

can recognize the port. Also use Scan for

Connections if you have connected an external modem after running the program. To avoid

the need for scanning, simply connect the cable or modem before starting the program.

5.5.1.1

Connection

Connection settings are used for contacting loggers on a given connection. Before you

contact a logger, you must first select the appropriate connection setting associated with the

COM port the logger is attached to.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 197 198

Pas de commentaire

ACR Electronics SmartReader Plus Manuel d'utilisateur Page 53