ACR Electronics ME406 Series Guide de dépannage télécharger pdf (Page 26)

Artex Products / ACR Electronics, Inc. 570-0023 Rev. G

Page 26 of 33

10.4 Cell Replacement from Cell Holder with Built-in Spring

10.4.1 Carefully remove the cell 131-0001 from the plastic cell holder.

10.4.2 Dispose of the cell according to the instructions specified in Subsection 10.6.

10.4.3 Carefully slide the negative end of the replacement cell 131-0001 inside the plastic cell

holder following the polarity mentioned inside the holder and on the cell, or by matching

the positive (+) end of the cell to the red wire side of the holder.

Figure 16: Cell Installation

10.4.4 Pull the built-in spring away from the end of the cell using tweezers and slide the cell

inside the holder.

Figure 17: Spring Installation

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Pas de commentaire

ACR Electronics ME406 Series Guide de dépannage Page 26