OWNER VESSEL RADIO CALL SIGN
Y1-03-0148-2 Rev. K 7 5.2 Dimension Drawings Category I Dimension Drawing NOT TO SCALE Figure 4 Bracket Sensor Magnet (inside bracket)
Y1-03-0148-2 Rev. K 8 Category II Dimension Drawing NOT TO SCALE Figure 5 Bracket Sensor Magnet (inside bracket)
Y1-03-0148-2 Rev. K 9 5.3 Configuration Overview Category I beacons are designed to be automatically deployed and activated. The beacon may also be
Y1-03-0148-2 Rev. K 10 NOTE: Some countries may fine vessel owners for causing false alarms. The permanent breakage of the Activation
Y1-03-0148-2 Rev. K 11 If the thumb switch is accidentally or inadvertently put in the vertical or test position (not in the OFF or ON position), the
Y1-03-0148-2 Rev. K 12 nominal 20 minutes if old GPS position data is stored in the memory of the RapidFix™. If there is no old GPS position data pre
Y1-03-0148-2 Rev. K 13 For both models Always refer battery replacement and any other beacon service to a factory authorized Service Ce
Y1-03-0148-2 Rev. K 14 The LUT processes the Doppler-shifted signal from the LEOSAR and determines the location of the beacon, then the LUT relays
Y1-03-0148-2 Rev. K 15 SECTION 8 – TECHNICAL INFORMATION 8.1 Type Approvals and Standards The RLB-32 and RLB-33 meet the requirements of Federal Co
Y1-03-0148-2 Rev. K 16 8.4 Specifications 406 MHz Transmitter Frequency 406 MHz Output Power 5 Watts Digital Message Format RLB-33: Standard Locati
PLEASE READ ALL WARNINGS, CAUTIONS AND NOTES CAREFULLY CAUTION: Before proceeding to install, test or use your new ACR E
Y1-03-0148-2 Rev. K 17 8.5 Warranty and Useful Life Policy Limited Warranty This product is warranted against factory defects in material and workma
Y1-03-0148-2 Rev. K 18 EC DECLARATION OF CONFORMITY ACR Electronics hereby declares that the following product is in conformity with Council Direct
Y1-03-0148-2 Rev. K 19 EC DECLARATION OF CONFORMITY ACR Electronics hereby declares that the following product is in conformity with Co
Y1-03-0148-2 Rev. K 20 INTERNATIONAL MARITIME ORGANIZATION SHORE BASED MAINTENANCE The Maritime Safety Committee approved guidelines for shore-based
Y1-03-0148-2 Rev. K 21 ACR ELECTRONICS INC. PRODUCT INFORMATION FOR PEOPLE’S REPUBLIC OF CHINA NOTE TO USERS OF GlobalFix™, RapidFix™, or Satellit
Y1-03-0148-2 Rev. K 22 ACR ELECTRONICS INC. 中华人民共和国产品信息 GlobalFix™ RLB-35, RapidFix™ RLB-33, or Satellite2 406™ RLB-32, NAT GPIRB, SATFIND 406, GEO
Table of Contents SECTION 1 – FOREWORD AND PRODUCT FEATURES ...
Y1-03-0148-2 Rev. J 1 APPROVED FOR GMDSS USE SECTION 1 – FOREWORD AND PRODUCT FEATURES Thank you for purchasing from ACR Electronics,
Y1-03-0148-2 Rev. K 2 SECTION 2 – REGISTRATION OF 406 MHZ BEACONS 2.1 Registration Importance It is mandatory that the owner of this 406 MHz beacon
Y1-03-0148-2 Rev. K 3 2.6 Do I Need a Radio Station License? The information in this section is provided for informational purposes only.
Y1-03-0148-2 Rev. K 4 SECTION 3 – FALSE ALARMS 3.1 Prevention of False Alarms An ACR 406 MHz EPIRB can be activated in an emergency by two differe
Y1-03-0148-2 Rev. K 5 The Category I float-free mounting bracket should be mounted securely to a vertical or horizontal surface (the mount has pred
Y1-03-0148-2 Rev. K 6 SECTION 5 – ACTIVATION AND DEPLOYMENT 5.1 Bracket Configuration
Commentaires sur ces manuels